CNC turret type high-pressure deburring cleaning machine that uses high-pressure water with a pressure of 50Mpa to remove residual cutting and burrs inside the workpiece.

高精度的點對點清洗

High precision point-to-point cleaning

通過CNC的控制，實現了定位精度0.08mm，能更高精度和更高效率的清洗。

Through the control of CNC, the positioning accuracy of 0.08mm is achieved, which enables higher accuracy and efficiency in cleaning.

*去除所有切屑和毛刺

*Remove all chips and burrs

從CNC定位的噴嘴中噴射出zui高50Mpa的高壓水，能*去除交叉孔、深孔、螺紋孔內的切屑和毛刺。

Inject high-pressure water with a pressure of 50Mpa from the nozzle positioned by CNC, which can remove chips and burrs in cross holes, deep holes, and threaded holes.

*實現自動搬送

*Implement automatic transportation

結合起重機架和傳送帶，機器人等實現的自動清洗機。

An automatic cleaning machine that combines lifting racks, conveyor belts, robots, etc.

豐富的選配品

Rich options

從各種不同清洗噴嘴和去毛刺工具，到各種形式的工作臺，過濾器等，集中了清洗工件的選項品。

From various cleaning nozzles and deburring tools, to various forms of workbenches, filters, etc., we have centralized options for cleaning workpieces.

實現廣泛區域的清洗

Realize cleaning of a wide range of areas

JCC-WIDE和舊型相同，設備寬度保持1500mm不變，X軸形成增加實現至650mm。

JCC-WIDE is the same as the old model, with the equipment width remaining unchanged at 1500mm and the X-axis formation increasing to 650mm.

對象工件

Object artifact

缸體、曲軸、EV用定子殼體、變速箱零件、ABS閥體、泵體、制動器等。

Cylinder body, crankshaft, stator housing for EV, transmission parts, ABS valve body, pump body, brake, etc.

本文由CNC高壓清洗機為您提供,我們的網站是:http://phdgoplaces.com 我們將以全心全意的熱情為您提供服務，歡迎您的訪問！

This article is provided by CNC high-pressure cleaning machine, and our website is: http://phdgoplaces.com We will provide you with wholehearted enthusiasm and welcome your visit!